The treatment ratio is the ratio of FFX to fuel. The higher the treatment ratio, the more fuel you need to use. The treatment ratio for FFX is between 1:5,000 and 1:10,000. This means that for every 5,000 or 10,000 parts of fuel you use, you will need one part of FFX.
Heavy fuels will have a lower treat ratio than No. 2 diesel, ethanol, or 83-89 octane fuels because they have a lower octane rating. The higher the octane number, the more energy it takes to ignite the fuel. This is why high-octane fuels are used in high-performance engines.
Fuel Factor X is a revolutionary additive that will not void the warranty on fuel-powered vehicles (see ASTM D975). MyDailyChoice has insurance to cover any claims that might occur while using Fuel Factor X.
The first few tanks of gas are the most important. You should double-dose your first 2-3 tanks and then use one dose per fill-up. This will help to ensure that your FFX treatment will have the maximal effect.
Using a generator, it would help if you doubled the dose for the first 3-5 fill-ups. Each product (foil packs or bottles) will come with FFX dosage guidelines that should be followed.
Fuel Factor X uses “sandwich compounds,” also called organometallic compounds. These compounds are known as burn rate modifiers and are used in fuels of all types. This compound is the active ingredient that helps to reduce emissions. This is a result of the reduced combustion ignition delay resulting from the organometallic compounds present in FFX.
Other benefits of the sandwich compounds found in FFX include the removal of carbon build-up. This carbon reduction can help to increase engine life and fuel economy and is a significant factor in reducing emissions resonant as a byproduct of treating your fuel with FFX.
Low sulfur fuel and low lubrication are the two main factors that can cause engine failure. Insufficient lubrication is caused by the lack of oil in the engine and a lack of sulfur in the fuel. The risks of these two factors are that they can cause engine failure, leading to a lot of money being wasted on repairs or, even worse, a car accident. FFX contains high-performance lubricants which help improve your engine’s performance and longevity. It is designed to protect against wear and tear while reducing friction.
FFX is a fuel-based additive that can be used to increase the octane rating of gasoline and other fuels. Fuel Factor X has been tested by and complies with several standards associations. One is the ASTM, a global organization that develops and publishes voluntary consensus standards for materials, products, systems, and services.
FFX is non-toxic, biodegradable rust and corrosion inhibitor. It will help stop iron oxide from forming and protect metal substrates from leftover water corrosion. Our detergent will help you clean your fuel tank, fuel line, pump, and injector.
Our lubricity agent will also prevent dirt and gumming up of your fuel system. FFX engine additives also help increase the lifetime of valves, pistons, and other engine parts. FFX also reduces carbon build-up in your engine, which can dissipate performance because your pistons need a clean surface to finish their movement.